NOVA 1-1/4″ FLEXIBLE POINT DRIVE CENTER (SKU 9021 AND 71101)
The NOVA 9021 1-1/4 Inch Flexible Point Drive Center is a clever design popular among spindle turners. The “Flexible Point” spring-loaded center point allows you to set your workpiece in place (or remove it) with the lathe turning. Your workpiece spins when you increase tailstock pressure and the drive center teeth bite into the wood. With light pressure, it will drive your work, but allow it to stop if you have a catch (minimizing damage to your workpiece). With increased pressure, it will power through even the heaviest cuts. Since its multiple teeth spread the pressure over a larger area, the Flexible Point drive center is less likely to split your workpiece than a standard spur.
- Spring loaded center pin
- Made to fit into the jaws of a chuck
- Eliminates the need to remove the chuck
- Fits neatly with NOVA’s four jaw chucks
Warranty: 2 Year Full Replacement
Only logged in customers who have purchased this product may leave a review.
California Residents Proposition 65
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.
WARNING: This product can expose you to chemicals (Rust Prevention Oil) which are known to the State of California to cause cancer. Always wash your hands after unpacking the product for first use and use in a well ventilated area. Dispose of packaging bags thoughtfully.
For more information go to: P65Warnings.ca.gov