fbpx

Home Products CHUCK ACCESSORIES INSERTS/ADAPTORS NOVA ALL INSERT SKUS – CHUCK INSERTS/ADAPTOR COMPATIBILITY CHART

NOVA ALL INSERT SKUS – CHUCK INSERTS/ADAPTOR COMPATIBILITY CHART

SKU: Various – See chart below for full list.

NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded)
The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.

Insert type chucks are the type where the insert adaptor system can be used. NOVA Insert Type Chucks include: G3 (SKU 48202) and SuperNOVA2 (23055). All NOVA insert adaptors are compatible with G3, SuperNOVA2 insert type chucks.

NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

Warranty: 6-Year Full Replacement

Product Description

  • NOVA has a range of chucks along with inserts in order to fit the majority of lathes that are currently available on the market.
  • The insert/adaptor versions of NOVA chucks all use the same insert/adaptor system to ensure maximum adaptability and flexibility for the user.

HOW DOES THE INSERT SYSTEM WORK?

The insert fits into the back of the chuck and onto your lathe headstock spindle. The inserts are threaded both inside and out. The outside thread is made to fit into the NOVA Chucks. The inside thread comes in a variety of sizes. The size you need is determined by your lathe spindle thread size. See the insert thread chart below.

If you have reliable information for your spindle thread size but there is no match on the chart, you may have an unusual lathe that NOVA doesn’t have an adaptor for. You will need to purchase a blank chuck or a blank insert/adaptor and get it threaded to your requirements.

Some thread sizes we direct thread into the chuck body. Therefore, these don’t require insert adaptors. A directly threaded chuck body cannot be altered to an insert type body or another thread size once threaded. Be sure that your lathe thread size is not covered by the insert/adaptors first!

Terms:
BSF: British Standard Fine
BSW: British Standard Whitworth
RH: Right hand
LH: Left hand
TPI: Threads per inch
UN: Unified National Standard
UNC: Unified Coarse Standard
UNF: Unified Fine Standard
UNS: Unified Special

Chuck Insert/Adaptors

The thread sizes listed are the size which the adaptor converts to
(e.g. The thread size listed in the table should match the thread size on your lathe spindle.) 
Click here if you don’t know your lathe spindle thread size. 

Sizes listed below are subject to change.
Always best to check with your lathe manual and manufacturer.

SKUThread
Diam.
PitchThread
Direction
StandardCompatible
Lathes
Set Screw
I2NSM202 RH Tyme Cub
I3NSM201.5 RH Electra Beckum,
Multico Sumaro
I6NS3/4″Plain Bore M6
I7NS1 1/8″8TPIUN(NOT UNC)
I8NS7/8″12TPILHNS
I9NS3/4″16TPIRH(with 6mm register)
IANS3/4″4TPIRHBSP TL1000 (pre 1986)
IBNS3/4″4TPILHBSP TL1000 (pre 1986)
ICNS1″10TPIRHBSF TL1000, Woodfast/Durden
IDNS1″8TPIRHUNC Delta, Rockwell, Golding,
General, NOVA Comet (North America)
and Mercury lathes
IENS1″12TPIRHUNF Myford ML8
Turnstyler
IHNS3/4″10TPIRHBSW Rockwell
Homecraft
IINSM243RH B-Line
Arundel K600/K450
IJNS1 1/8″12TPIRH BSW Myford Mystro
Masterlathe (New Zealand)
IKNSM182.5RH Elu DB 180
ILNS1 1/4″8TPIRHNOVA Galaxi, NOVA Saturn, NOVA DVR 3000, NOVA XP, NOVA 1624 and 1624 II (North America)
Laguna Revo
 M6
IMNS1″10TPILHBSF TL1000
Woodfast/Durden
INNSBlank (Can be threaded up to 28mm)
IONS1 1/8″7TPIRHBSWMorton
IQNSM303.5RHNOVA TL1500/3000/Comet
(European & S. Hemisphere)
Woodfast
IRNS1″8TPIRHJet 1221 Lathe
ISNS5/8″Plain BoreDesigned Specifically for Shopsmith Pro V and Power Pro Machines M6
ITNS1″8TPIDual Threaded LH & RHNOVA Mercury Mini Lathe
IUNS1 1/8″12TPIRHUNFTaiwanese lathes
IVNS7/8″14TPIRHNF
IYNS1 1/4″8TPIRHFor lathes don’t
have reverse turning ability
IWNSM252RH Tyme Avon (’83 on) and Classic Tanner SD165, Selbix Springwood, Sorby, Cotech
IXNS1″8TPIRHDesigned specifically for the NOVA Comet II Midi Lathe,
features lock for the reverse function.
 M6

Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.

Reviews

There are no reviews yet.

Be the first to review “NOVA ALL INSERT SKUS – CHUCK INSERTS/ADAPTOR COMPATIBILITY CHART”

Your email address will not be published. Required fields are marked *