|
NOVA
CAST IRON STAND
Code: 25054
Note: In some markets, this stand may not be available. Check with your
reseller.
|
|
|
 The
NOVA Cast Iron Stand provides rock solid stability for all NOVA lathes.
Made
from high quality cast iron, with interchangeable leg sections,
this stand is the perfect companion to both the Nova 1624 and the Nova
DVR
XP lathes.
|
|
Features & Benefits
 Dependable
Performance. Solid cast iron upper section, CAD designed and
tested for optimum strength. The stand pieces are cast from a high
grade cast iron with solid section thickness and CAD generated
gussets at critical points., designed to withstand extremely high
stresses with practically no distortion
- Compact for easier mobility and set
up, but sturdy enough to cope with the big capacity the
NOVA
1624 & DVR XP has – 29” bowls (with optional outrigger
accessory) and 44” between centres (with optional accessory
extension bed)
- Strong robust feet
for
confident mounting to the floor with provisions for jacking bolts to
level on uneven surfaces.
- 360° Access to the Workpiece
– the stand allows complete access to the working area.
- Extra strength for BIG work if
required. Holes in feet so the stand can be bolted to
floor avoiding any 'walking' when roughing or turning large out of
balance work .
- Easy Clean.
No collection area
under lathe for sawdust build-up. Sawdust drops straight to
floor
- Easy Assembly access of bolts
both to the lathe and legs
|
Product
Technical Specification
- Height of stand – 802mm/31.5”
inches
- Weight of one stand piece – Approx
22kg
- Floor envelope – 820mm x 1386mm
32” x 54.5” inches
|
Standard
Equipment
-
2
x Cast
Iron Stand Legs
-
Fastenings
-
Manual
|
|
|
