NOVA User's Gallery

(Click the image to enlarge)

This vessel in open segment turning is 42 cm high and 32 cm in diameter. It contains of 1221 individual segments! 

It was made by Mr Oeistein Jensen from Norway. The materials of this project are African Padauk, Jatoba, Black Walnut and Norwegian Birch.

This tealight in closed segment turning is 100 mm high and 150 mm in diameter. It contains of 121 individual segments.

It was made by Mr Oeistein Jensen from Norway. The materials of this project are African Padauk and Norwegian Birch.

This is the smallest vessel Mr Oeistein Jensen have turned in his Nova 3000. 

It is 40 mm high and contains of 240 individual segments, all segments are 2 mm high. The materials of this project are African Padauk and Norwegian Birch.

This is a vessel 68 mm high, with 308 pieces, all pieces are 3 mm high. 

It was made by Mr Oeistein Jensen from Norway. The materials of this project are Norwegian Birch and Purpleheart.

This Segmented bowl was made by Mr Keith Perry from UK on a Nova DVR XP.

This Segmented bowl was made by Mr Keith Perry from UK on a Nova DVR XP.

This dovetailed box was made by Mr Eion Wheeler from North Queensland, Australia.

This large bowl was made by Mr Eion Wheeler from North Queensland, Australia.

These unique looking boxes were made by Mr Steve Holton from Alaska. 

Its material yellow Cedar only grows around in Alaska and has a unique scent.

Page: 1  2  3  4

You are most welcomed to share your works with us and other woodturners by sending them to service@teknatool.com.