|
NOVA User's Gallery (Click the image to enlarge) |
|||
|
||||
|
Mushroom colection
Made
by Claude St-Marseille from Canada, nova 1624-44 and precision chuck |
Made
by Claude St-Marseille from Canada, nova 1624-44 and precision chuck |
Made by Claude St-Marseille from Canada, nova 1624-44 and precision chuck |
||
|
Salad Bowl
This project is provided by Mr Paul Pokines, using a NOVA Lathe. It is a 14 1/2" diameter by 4 3/4 high salad bowl. The interior was finished Watco which is SAFE for food contact and the outside was done in clear polyurethane.
|
Spinning Tops
This made by Mr Claude St-Marseille from Canada using NOVA 1624-44 and NOVA precision Midi chuck. Size: |
Bowl
This bowl is the second bowl made by Mr Mike Minto from USA. Material: Ambrosia maple, zebrawood and purpleheart. |
||
|
Echoes I
This piece was made by Mr Allen Alexopulos, using NOVA 3000 lathe & SuperNova chuck. Dimension:
Base: 2 1/8" dia.
|
Santos rosewood box
This box was made by Mr Mike Stafford, using a NOVA 3000 lathe. Dimension: 1 3/4" tall and 2 3/4"
|
Shedua box
This box was made by Mr Mike Stafford, using a NOVA 3000 lathe. Dimension: 2 1/2" tall and 3 1/2"
|
||
|
Santos rosewood finial box
This box was made by Mr Mike Stafford, using a NOVA 3000 lathe. Dimension: 3" in diameter and 4 1/2" tall
|
Off Centre Clock
This creative Off center clock was made by Dennis Smith, using a DVR XP lathe. The materials of this project is Cherry Wood.
|
Three sided bowl
This beautiful Three sided bowl was made by Dennis Smith, using a DVR XP lathe. The materials of this project is Sapele.
|
||
|
Irish bagpipes and Swedish bagpipes
These great looking Irish bagpipes and Swedish bagpipes were made by Mr Boris Favre from Canada on a NOVA 1624-44 lathe. For more photos and information on Mr Xavier Favre's project, please follow this link to his website: http://www3.telus.net/bo/
|
||||
|
You are most welcomed to share your works with us and other woodturners by sending them to service@teknatool.com. |
||||
